4030 Pleasantdale Rd Suite A, Doraville, GA 30340

Silicone Rubber Window, Door & Siding Sealant

Brand: DAP

Appearance/Consistency: Smooth, gunnable paste

Base Polymer: Silicone rubber

Filler: Not applicable

Volatile: Not applicable

Weight % Solids: >97%

Density (lbs per gallon): 8.0

Odor: Vinegar like

Clean Up: Mineral spirits

Flash Point: >212ºF

Freeze Thaw Stability (ASTM C1183): Will not freeze

Shelf Life: 24 months

Coverage 9.8 oz: 53 linear feet at 3/16” diameter bead 2.8 oz: 15 linear feet at 3/16” diameter bead

Use for Caulking & Sealing: Windows, Doors, Siding, Trim, Pipes, Vents, Ducts, Gutters, Flashing

Adheres to: Wood, Composite wood, Aluminum, Most metals*, Glass, Ceramic, Porcelain, Vinyl, Most plastics & rubbers

Available Stock: 30 oz. Cartridge

Get Estimate

Description:

DAP® 100% SILICONE RUBBER WINDOW, DOOR & SIDING SEALANT is a durable, 100% waterproof and weatherproof sealant for sealing out drafts, water and moisture around windows, doors, siding, gutters, flashing, pipes, vents and more. It stays flexible to withstand expansion and contraction without cracking or losing adhesion. Cured sealant is mold and mildew resistant. Interior/exterior use.

Features & Benefits:

When tested in accordance with ASTM C719 meets the ASTM C920 requirements for Class 25, Use G
100% waterproof & weatherproof seal
Flexible
Cured sealant is mold & mildew resistant
Interior/exterior use

Instructions:

Product Application

If using squeeze tube, remove cap & cut nozzle at 45º angle to desired bead size. Unscrew nozzle & remove foil seal. Replace nozzle.
Is using cartridge, cut nozzle at a 45° angle to desired bead size. Puncture inner foil seal. Load into caulk gun.
Fill gap or crack with sealant.
If necessary, tool or smooth the bead of sealant with a finishing tool before the sealant skins over.
Allow sealant to cure for at least 12 hours before exposing to water.
Do not touch or clean sealant for 24 hours. Sealant reaches full cure in 24 hours.
Clean up excess uncured sealant from surface and tools with mineral spirits. Scrape or cut away excess cured sealant. Do not use mineral spirits to clean hands or skin. Wash hands or skin with soap and water.
Sealant is not paintable. Paint surfaces prior to applying sealant.
Reseal cartridge/tube for storage and reuse.

Clean-up

Remove excess uncured sealant from surfaces and tools with mineral spirits. Excess cured sealant must be cut or scraped away. Do not use mineral spirits to clean hands or skin. Wash hands or skin with soap and water. Store container in temperatures below 80ºF and in a dry place.

Disclaimer: The specifications provided on this page are based on the manufacturer's technical documents. For the most accurate and up-to-date information, please refer to the original technical documents provided by the manufacturer. Click here to view the technical document.