Liquid Nails Heavy Duty Construction Adhesive

(770)533-1880

4030 Pleasantdale Rd Suite A, Doraville, GA 30340

Adhesives/Glue

Heavy Duty Construction Adhesive

Brand: Liquid Nails

Base: Latex

Color: Tan

Appearance: Smooth paste

Application Temperature: 0-140ºF (5-38ºC)

Service Temperature: 0-140ºF (-18-60ºC)

Sage (ASTM D 2202): <0.10"

Shear Strength: 24 hours - 150psi. 48 hours - 180psi. 1 week - 240psi

Viscosity: 500,000 cps

Open Time: 20 minutes at room rempreate

Minimum Cure Time: <24 hours at room temperature

Freeze Thaw Stability: No effect after cycles

Flammability: Non-flammable

Percent Volatile: 28%

Shelf Life: 1 year from date of purchase

Odor: Slight LATEX

VOC: <7% by wt.(<70 g/L)

Get Estimate

Description:

Liquid Nails Heavy Duty Construction Adhesive, LN-903/LNP-903, is a multi-purpose, low-solvent, high-strength construction adhesive specifically formulated to provide the professional and do-it-yourselfer excellent adhesion and extended working time. Certified by UL Environment to meet the GREENGUARD Gold Standard as a low emitting material.

Recommended for:

Plywood
Particleboard
Brick Veneers (Interior Only)
Foamboard
Waferboard
Treated Lumber
Imitation Stone (Interior Only)
Ceiling Tiles
Cementboard
Drywall
Tileboard
1/8" MDF Paneling.

NOT Recommended for:

Plastics
Vinyl
Cermaics
Mirror
Flooring Applications
Underlayment
Granite
Marble
Installing tileboard directly

Benefits:

Strong bond will outlast project
Water and weather resistant
Bonds a wide range of construction materials
Interior & Exterior
Strong, durable and flexible
Instant holding power
20 minute working time
Bridges gaps

Instructions:

Preparation:

Surfaces must be clean, dry and structurally sound. Paneling must be conditioned per manufacturers instructions. Research all installation instructions and read label for safety, health and environmental information. Place in caulk gun, cut nozzle and puncture inner seal with a nail or wire.

For Cabinets and Countertops:

Apply 1/4" bead to contact area. Press into place. Mechanical fasteners must also be used for wall cabinets.

For Furring Strips or Studs:

Apply 1/4" zigzag bead to each stripe or stud. Press into place. Use nails at top and bottom.

For Drywall:

Apply 1/4" zigzag bead to each stud. Preass drywall into place. Position panels so that edges meet at stud center. Nail as required.

Clean-up

Water when wet, scraping and mineral spirits when dry.

Disclaimer: The specifications provided on this page are based on the manufacturer's technical documents. For the most accurate and up-to-date information, please refer to the original technical documents provided by the manufacturer. Click here to view the technical document.